Monorail Wire Rope Hoist 1 t, 8 m
- Lifting capacity 1,000 kg
A 500 kg wire rope monorail hoist with 6 m lifting height. Its electric trolley runs on an NPI 140 I-beam, and it is operated from a four-motion pendant, with a 360° swivel hook and limit switches.
Zoom
Tap the image to open it full screen and zoom in.
| Lifting capacity | 500 kg |
|---|---|
| Lifting height | 6 m |
| Lifting speed | 7 m/min |
| Hoist motor | 0.75 kW, 1500 rpm (GAMAK), with brake |
| Travel motor | 0.18 kW, 1400 rpm |
| Travel speed | 15 m/min |
| Wire rope | 6 mm Nuflex |
| Hook | 360° swivel, DIN 15401 No. 1 (P) |
| Limit switches | Yes (top and bottom) |
| Power supply | 380 V |
| Brake voltage | 190 V AC |
| Beam | NPI 140 I-beam |
| Weight | 90 kg |
| Pendant | 4 motions (up, down, right, left) |
It is used in workshops, assembly lines and warehouses where loads of up to half a tonne move along a fixed line: lifting parts onto workbenches, handling small motors and moulds, and moving work between stations. The hoist runs on an I-beam hung from the ceiling or a steel structure, driven by its electric trolley; lifting, lowering and travel along the beam are all controlled from the pendant.
The 6 m lifting height is enough in workshops with a low or medium ceiling to pick a load up from the floor and set it down on a workbench or a rack.
The hoist runs on an NPI 140 I-beam and weighs 90 kg. The technical drawing and the rope, limit switch, travel wheel, hook and pendant details are shown on the specification sheet. For a different lifting height or capacity, message us on WhatsApp and we will quote accordingly.
The load, the lifting height and the beam length. Send them on WhatsApp or give us a call and we'll come back with a model and a price.